You often hear a lot of questions like what size belt to choose? Finding your belt size can be a real headache with all the different size correspondences out there. We have put together a complete and detailed summary of all these correspondences so that you can be confident with all your purchases!

Belt sizes are generally indicated in inches or centimeters and correspond to the length of the belt. They are classified in increments of two inches or five centimeters, although some brands may use finer belt sizes. For example, a size 32 belt corresponds to a waist measurement of 32 inches, while a size 34 belt corresponds to a waist measurement of 34 inches.

It is important to note that belt sizes can vary depending on manufacturers and brands. Some brands may have smaller or larger belt sizes than normal, so it is recommended to check the size information before making your purchase. If you are buying a belt online or in a store that does not have your size, you can try to refer to the manufacturers' or brands' size guides to find the size that suits you best.

How to measure a belt?

If you already own a belt, you can measure it and refer to the corresponding size guide.

Here is our explanation for measuring a belt:

• Take a belt that you already own and that fits you well.

• Start by measuring the distance between the belt buckle and the first eyelet (or hole).

• Measure the distance between each eyelet (or hole) until you reach the other end of the belt.

• Add the two measurements obtained to get the total length of the belt!

Here's an example: if the distance between the buckle and the first eyelet is 8 cm and the distance between each eyelet is 5 cm, then the total length of the belt will be 8 + (5 x [number of eyelets]) cm. If the belt has 5 eyelets, then its total length will be 8 + (5 x 5) = 33 cm.

This simple calculation applies to measuring a women's belt size as well as a men's belt size!

It is important to note that the length of the belt also depends on the style and manufacturer. It is therefore recommended to check the manufacturers' size guides before buying a belt.

How to find your belt size?

If you don't have a belt to measure its size and make a comparison, you can simply measure your waist with a tape measure. Discover each step and finally find out how to find your belt size:

• Measure your waist. To do this, place the tape measure around your waist, at the level of your navel. Make sure the tape measure is flat against your skin and does not slip. Note the measurement in inches or centimeters.

• Consult the belt size chart to find your size. Belt sizes are generally indicated in inches or centimeters and correspond to the length of the belt. For example, a size 32 belt corresponds to a waist measurement of 32 inches.

• If you have trouble finding your belt size using a size chart, you can try measuring the length of your current belt. To do this, stretch the belt and measure the distance between the beginning and the end of the belt buckle.

• If you are buying a belt online or in a store that does not have your size, you can try referring to the manufacturers' or brands' size guides. They can provide information on belt sizes corresponding to different waist measurements.

How to choose your belt size?

Choosing your belt size can sometimes be complicated with all the size correspondences. We have created a belt size guide from XS to XXL so that you can match your pant size with your belt size, as well as your waist size with your next belt.

Belt size guide, pant waist & belt size

Belt size guide, waist size & belt size

Frequently asked questions! How to make a hole in a belt?

There are several methods for making a hole in a belt, but here's what I recommend:

• Use a punch or a knitting needle to pierce a small hole at the desired location. This method is simple and quick, but the hole can easily deform if the belt is made of thick leather.

• Use an electric drill with a drill bit of the desired size. This method is faster and allows for a cleaner hole, but it requires a certain level of skill and equipment.

• If you don't have a punch or a drill, you can use a sharp knife or a sharp, hard object (like a pen or a paperclip). Be careful not to hurt yourself or damage the belt.

It's important to make a hole of the right size so that your belt can easily pass through your pants' buckle. You can use a seamstress's tape measure or a measuring tape to ensure the hole is the correct size.

Once you've made the hole, you can reinforce it by inserting a metal pin or by sewing a reinforcement loop inside the belt. This will prevent the hole from enlarging or deforming over time.

What belt size for a men's 44?

We recommend you follow the indications above as well as the men's belt size guide, but we'll still give you an example!

Most belts are sized according to pant size, not the person's size. Therefore, to know your belt size, if you wear a 44, it is recommended to measure your waist.

To do this, take a tape measure and place it around your waist, where you usually wear your belt. Make sure the tape measure is flat and not twisted. Note the measurement obtained and add 1 or 2 inches (2.5 to 5 cm) to get the belt size that will suit you best.

For example, if your waist measures 36 inches (91 cm), you should take a 38 or 40 inch belt (96 to 102 cm). If you have trouble finding a belt of this size, you can also opt for an adjustable buckle belt, which will allow you to adjust the size of the belt according to your needs.

It is important to get the right belt size to be comfortable and to prevent the belt from slipping or coming undone. If you have any doubts about the size to choose, do not hesitate to ask a salesperson or a professional tailor for advice. You now know how to find your belt size!

Maintenance tips, how to properly care for your belt?

Here are some tips for properly maintaining a belt:

• Use a soft, dry cloth to wipe your belt regularly. This will remove dust and superficial stains.

• If your belt is leather, use a leather care product specifically designed to clean and restore its shine. Apply the product with a soft cloth and wipe with a dry cloth.

• If your belt is made of canvas or any other material, clean it with a damp cloth and dry it thoroughly before putting it back on.

• If your belt is very dirty or stained, you can clean it by hand washing it in soapy water. Rinse it thoroughly and let it air dry.

• Avoid exposing your belt to large amounts of water or sweat. If you sweat a lot, it is best to remove your belt before showering or changing.

• Store your belt away from direct light and excessive heat, as this can damage the material. A cool, dark place is ideal.

By following these tips, you should be able to keep your belt in good condition after your purchase and for many years to come!